---
title: Step 9. Test your scenario
slug: step-9-test-your-scenario
docTags: 
createdAt: 2025-03-20T12:38:51.419Z
---

To make sure that both modules work together, you need to test your scenario.

::::WorkflowBlock
:::WorkflowBlockItem
Right-click the Google Sheets module and select **Choose where to start**.

![](https://api.archbee.com/api/optimize/oAyFj2GHlBeBVWF5OAir2/kPA5Dko4fA2aTJ5JcSnSg-20251103-195921.png)
:::

:::WorkflowBlockItem
Select **All **and click **Save. **

![](https://api.archbee.com/api/optimize/oAyFj2GHlBeBVWF5OAir2/8AfzmHUJiJE7joH5PiB7J-20251103-195945.png)
:::

:::WorkflowBlockItem
In the Scenario Builder toolbar, click the **Run once** button.

![](https://api.archbee.com/api/optimize/oAyFj2GHlBeBVWF5OAir2/oE82Ng76I6MKDb__bY09Q-20251103-200006.png)
:::

:::WorkflowBlockItem
Check the output bubbles above each module to see the results. The numbers shown in the bubbles indicate how many operations were processed/credits used.

![](https://api.archbee.com/api/optimize/oAyFj2GHlBeBVWF5OAir2/YAmMhOt61fj9MiYZUzvso-20251103-200037.png)
:::

:::WorkflowBlockItem
Click the output bubble above the Google Sheets module to see all rows processed in the Output section. Since we selected **All** in step 2, it processed all rows in your Google sheet (up to the limit of 20 you set earlier).

![](https://api.archbee.com/api/optimize/oAyFj2GHlBeBVWF5OAir2/aj0c3lyR4aqzl9wDZe-Nw-20251103-200056.png)

Click the output bubble above the Slack module to see: 

- The **Input** information it received from Google Sheets.
- The **Output** information about the Slack message it sent. 

![](https://api.archbee.com/api/optimize/oAyFj2GHlBeBVWF5OAir2/RO1xaCsIDJLUEWOHuEjei-20251103-200132.png)
:::

:::WorkflowBlockItem
Go to your Slack channel and check if the notification appeared correctly.

![](https://api.archbee.com/api/optimize/oAyFj2GHlBeBVWF5OAir2/sJV9yXJhAvx0rKDOghr61-20250930-143946.png)
:::

:::WorkflowBlockItem
Compare the data in your Slack message with your **Prospects** spreadsheet to ensure all information was transferred correctly. 

![](https://api.archbee.com/api/optimize/yjwhINLS3fc-NXg38fV_d-7a0wwkNHMvLJabbox7xyr-20250323-160801.png)
:::
::::

:::hint{type="info"}
**Understanding bundles**

A bundle is a collection of data delivered together. It can contain a single piece of information (like an email address) or multiple pieces of data (like spreadsheet rows). When you click on the output bubbles, you'll see the bundles that were processed:

- **Input bundle**: Contains the information you entered into the module and data you mapped from previous modules.
- **Output bundle**: Contains the results of the actions taken in the application and any data generated that can be mapped to the next module.
- **Action** modules (like your Slack module in this example) use as many credits as runs needed to process all bundles. If it processes 1 input bundle, it consumes 1 credit.
- **Trigger** modules (like your Google Sheets module) only use 1 credit, even if they output multiple bundles.

For example, if your Google Sheets document has 3 rows and you selected **All**, the Google Sheets module will generate 3 output bundles but only use 1 credit because it's a trigger module. These become input bundles for the Slack module, which processes them and sends 3 messages. The Slack module will use 3 credits because it processes 3 input bundles.
:::